|
Home
Power System
Electrolyte System
Gap System
Cutting Metal
Sources
|
Internet Sources
Mailing Groups:
- Yahoo Group mailing list on EDM:
- CNC Zone Mailing list with EDM forum:
DIY EDM Related Websites:
- Making and Using a Basic EDM from Model Engine News
-
Print Sources
Books:
- EDM How-to Book by Ben Fleming, (2005) ISBN 976759608
- Ramah Machines Metal Disintegrator by Ben Fleming
- The EDM Handbook, by E. Bud Guitrau (1997) ISBN 978-1569902424
- Build an EDM, Electrical Discharge Machining - Removing Metal by Spark Erosion by Robert Langlois (1997) Village Press, ISBN 978-0941653510 (this book is based on some of his articles listed below)
- Electrical Discharge Machining by Elman C. Jameson, ( 2001), ISBN 978-0872635210.
- Wire EDM Handook, by Carl, Carol, and Steve Sommer, (2000) ISBN 978-1575373010
- The Complete EDM Handbook, by Carl and Steve Sommer, (2005) ISBN 978-1575373027
Magazine Articles:
- EDM: Space-Age Maching in Your Home Shop, anon.
- Popular Science, March 1968, Vol 192, pg 149-153
- Electric Dicharge Machining (EDM), Hank Meador
- Home Shop Machinist, January 1991
- Home Shop Machinist, March 1991, pg 11
- Home Shop Machinist, July 1991, pg 4-6
- Home Shop Machinist, May 1992, pg 10-11
- Home Shop Machinist, May 1994, pg 44
- Home Shop Machinist, May 1995, pg 19
- EDM, unknown author
- Electronics Now, February 1993, pg 79-81
- Electronics Now, May 1993, pg 78-80
- More on EDM, Jack Lewis
- Home Shop Machinist, May 1994
- EDM Safety, Norm Wells
- Home Shop Machinist, May 1995
- Home Shop Machinist, September 1995
- Electrical Discharge Machining - Removing Metal By Spark Erosion, Robert Langlois
-
- Home Shop Machinist, May 1995
- Home Shop Machinist, July 1995
- Home Shop Machinist, September 1995
- Home Shop Machinist, November 1995
- Home Shop Machinist, January 1996
- Home Shop Machinist, March 1996
- Home Shop Machinist, May 1996
- Home Shop Machinist, January 2003
- Home Shop Machinist, March, 2003
- Home Shop Machinist, May, 2003
- Home Shop Machinist, July 2003
- Home Shop Machinist, September 2003
- Home Shop Machinist, November 2003
- Spark Eroding a Broken Stud, Robert Langolis
- Home Shop Machinist, May 1995
- Spark Erosion Machine, Peter Rawlinson
- Model Engineer's Workshop, April 1999, pg 47-54
- Model Engineer's Workshop, June 1999, pg 24-30
- Model Engineer's Workshop, July 1999, pg 19-23
- Model Engineer's Workshop, August 1999, pg 24-29
- Spark Eroders and the CNC Mill, Peter Rawlinson
- Model Engineer's Workshop, February 2000, pg 24-31
- Spark Eroder Dielectric, Peter Rawlinson
- Model Engineer's Workshop, February 2000, pg 36-38
- Electrical Discharge Machine (EDM), Ken Round
- Home Shop Machinist, July 2000
- Mark 3 Wire Eroder, Peter Rawlinson
- Model Engineer's Workshop, December 2003, pg 38-41
- Model Engineer's Workshop, February 2004, pg 22-27
- Model Engineer's Workshop, April 2004, pg 28-33
- Model Engineer's Workshop, June 2004, pg 30-34
- Model Engineer's Workshop, July 2004, pg 26-31
- Electric Discharge Machine (EDM), Robert Washburn, Lee Root
- Strictly IC, Issues 34,35,36,37,38
- A Simplified Spark Erosion Machine, Geoff Oakes
- Model Engineer's Workshop, February 2005, pg 43-45
- A Simple Spark Erosion Machine, Eric Rumbo
- Model Engineer's Workshop, July 2006, pg 51-52
Component Suppliers
- Electronics:
- Plumbing:
- Electrodes:
- Electrolyte:
|
